Senior Mechatronics Engineer, Omen

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

ABOUT THE TEAM

The Maneuver Dominance team at Anduril develops operationally relevant, multi-asset autonomy. Omen is Anduril’s hover-to-cruise autonomous air vehicle (AAV) that packs the endurance, payload, and mission flexibility of much larger airplanes into a novel runway-independent Group 3 platform. Omen can operate from ship decks, beaches, or remote island clearings, providing true runway independence and freedom of maneuver across defense and civilian domains. Omen is the first tail-sitter aircraft with a mass-production contract, with an order of 50 systems representing a decisive investment that anchors production and accelerates the development of future systems.

ABOUT THE JOB

Formula SAE, Baja SAE, Design Build Fly, or an equivalent history of building things that move. We need a Mechatronics Engineer to own the integration of electromechanical actuation, sensing, and control subsystems that enable Omen's hover-to-cruise transition, ensuring every system, payload, and sensor interface performs reliably across the full flight envelope.

WHAT YOU'LL DO

Bridge the software team and hardware teams, ensuring both teams are in alignment.

Own payload hardware integration end to end. EO/IR and imaging sensors, RF payloads, gimbals, rangefinders, inertial and position sensing.

Drive mission system selection through trade studies balancing performance, SWaP, thermal, latency, and environmental robustness.

Characterize sensors on the bench and in flight: noise, latency, bias and drift, boresight stability, and failure modes

Define and own payload interface control; mechanical mounting and alignment, power and signal definitions, harnessing, vehicle bus integration, and time synchronization

Write production software and firmware for payload subsystems; drivers, sensor processing, pointing and stabilization control loops, calibration and coordinate frame libraries, health management

Support aircraft integration, bring-up, and functional checkout, and plan and execute ground and flight test campaigns for payload performance

Lead root-cause investigations for payload and pointing anomalies spanning mechanical, electrical, firmware, and software boundaries

Feed lessons learned back into ICDs, calibration procedures, and production assembly and acceptance test documentation

REQUIRED QUALIFICATIONS

Strong engineering background from industry or school, ideally in Mechatronics, Robotics, Electrical Engineering, Aerospace, Computer Science, or Physics

4+ years of hands-on electromechanical and sensor integration experience in robotics, aerospace, or similar

3+ years of C++ (or Rust) in a Linux environment, plus tooling in Python; demonstrated experience developing software for hardware

Proficiency across a meaningful portion of the robotics stack, from sensor interfacing to actuation. Partial stack is okay

Solid grasp of low-level communications (Ethernet, CAN, UART, SPI, I2C), real-time systems, and motor control

Experience with sensor characterization, calibration, and coordinate frame management; cameras, IMUs, encoders, GNSS, or LIDAR

Experience building and executing hardware test rigs, with competence on oscilloscopes, logic analyzers, DMMs, and test automation

Ability to read schematics, support board bring-up, and define harnesses alongside EEs; familiarity with CAD (SolidWorks, NX, or equivalent)

High ownership and a bias toward action

Ability to travel 25% with potential surges above 25%

Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

VTOL, tail-sitter, or rotorcraft experience, and familiarity with the payload environment they create (vibration, EMI, rotor wash)

Experience with rapid payload/sensor integration onto unmanned platforms, including flight test support

Experience with gimbals, stabilized pointing, boresighting, and geo-referencing or targeting chains

Experience in perception, localization, mapping, tracking, or guidance, and related system performance metrics

Embedded firmware in C, including device drivers and optimizing for limited resources

Familiarity with avionics buses (ARINC 429, MIL-STD-1553, Ethernet avionics) and time sync (PTP, PPS)

Modeling and controls in MATLAB/Simulink; experience building SIL/HIL simulators

Environmental qualification testing experience (MIL-STD-810, MIL-STD-461) for electromechanical assemblies

Experience troubleshooting remotely deployed software on fielded hardware

US Salary Range

$146,000—$194,000 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including:

Benefits

At Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you’re supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.

Protecting Yourself from Recruitment Scams

Anduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.

To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:

No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.

Please always verify communications:

Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.

Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].

Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.

What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.

Data Privacy

To view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/.

By submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.